Seam Locations

Some people think that they can pick their seam locations regardless of the bid amount. And they can. But, it is necessary to realize that it could cost more. Why? Because when we bid a job, we usually bid it the cheapest way. This means we choose the number of seams and their location. If you want to dictate seam location, realize that you may be creating waste that you will most likely pay more for. Also, it is possible that your particular kitchen design will necessitate seam placement in areas that might cause waste, thus increasing your cost per SF. Sometimes it is not evident from a drawing that the seam location we choose is not appropriate. For example, you may have dishwasher placed in a location where a seam would normally go but due to the fact that the dishwasher is there, the seam will have to be relocated which could incur an additional cost. This is why proposals are always preliminary and based on information in the drawing. Alway estimate a little higher to take into consideration unforeseen circumstances such as the above mentioned situation.